Ideas For Building Wood Nightstand
Wood nightstand is the key to crafting wooden furniture is mastery of basic shapes. As with cooking or sewing, woodwork often recycles the same basic structure for different objects. The cube frame combines four wooden pieces in a hollow three-dimensional box. You can use this bass to make table frames, shelves, ottomans, benches, bedside tables and easier by changing the dimensions of the woodwork and the fasteners used. Functional additions, such as the wheels on this bedside table, keep the play from appearing for similar projects.
Cut two boards 2 meters long for the vertical sides. Cut two boards 1 1/2 meter long for the top and bottom. Sand all card by hand with sandpaper or a slip block; mechanical grinding machines are not necessary because only wood nightstand imperfections are treated at this stage. Wipe the discs with a please cloth. Place the base on a flat surface with 1 1/2 foot side horizontal. Place the board so that it hangs over 2 to 3 inches above the edge of the table. Spread a 2-inch strip of glue along the left and right sides of the face grain within 1/4 inch of the edges.
Stand the long boards at the top of the base so that end wood is in direct contact with the glue. You can hit the pieces on their sides and work horizontally if desired. Apply glue on end wood of the vertical boards and place 1 1/2 foot long board on top to form a rectangular cube. Place a clamp at each corner of the frame to compress the base and the top. Wipe excess glue with a damp cloth. Allow the glue to dry overnight. Attach the rectangle together with a 3- or 4-inch nail. Run nails in the face grains of the base and the best pieces in a row 1 inch from the side edge and 2 inches from the top and bottom of the play; the 2-inch gap parallel to the side panel allows space for the wheels. Place a nail every 1 to 2 inches.
Demon clamps. Turn the frame over so that the base is upright. Screw the wheels to the corners of the board with 1 1/2 inch screws. You may use a longer screw that secures penetrating end wood from the side panel. Fill all holes with wooden kittens. Wipe bit overnight. Sand bedside table. Wipe the play down with a please cloth. Apply two layers of painted paint to decorate and protect the nightstand. Apply the first layer is perpendicular to the direction of fiber. Allow paint to dry overnight. Apply a second layer with the seed. Leave the table undisturbed for three days to allow lacquer to begin to cure.