How To Convert Entryway Console Table

Rustic Entryway Console Table

Entryway console table – If you have a closet that is close to the front door and you want to maximize your space. An unused console table can be converted to make an inviting stay for your guests. Walk-in console table can provide a spacious locker, while smaller sized console table can provide a small foyer for your guests to walk through to access the rest of the home. After developing a plan for the new space, you can start making the necessary architectural changes.

Instructions

Take detailed measurements of entryway console table space. Measure the length, width and depth of the space. Plan a new layout for the console table. If the closet door needs to be moved, make a note of this information on your drawing. Remove all content from the console table, and find a new place for them. Remove any closet bars and shelves so you have a completely empty space to work with. Remove the console table from its hinges and remove the hinges from the wall.

Cut the plaster sheet to the measurement of the entryway console table. Hang plaster to cover the console table open. Use Gypsum tape to cover the seams between the plaster and the adjacent wardrobe walls. Spread joint with a 6-inch plaster tape knife. Cover the seam and plaster bond with the joint compound by holding the blade at a 30 degree angle. Start in the middle of the band and work your way out. Smooth out any air bubbles that are formed. Sand down some edges. Add additional layers of joint if the band is exposed or the coating is uneven.

Best Post:   The Most Popular 60 Inch Console Table