Bamboo Floor Mat – You can install the floor as direct, floating plywood, plywood, use the AcouBond system, or use a slider / batten to name a few. Each method of premium bamboo flooring has both positive and negative but when weighed, you can determine a more appropriate mounting method. The most common method and method of installing bamboo floors in WA is a direct stick. This is where our board is fix directly to the bottom floor which results in a very quiet floor to pass. Glue is roll onto the floor and the board is place on top of it.
This is a solid and permanent installation method. We use rubber drying stickers called Sikabond T55. Using alternative glue for this non-elastic mounting method will usually cause pressure to be place on the board causing cupping and widening of the gap between the boards. Wood bamboo sticks are easy and stable, stop the board from moving too easily. And can run on the same day when the stick is install. However, this floor will be difficult, but it is not possible to remove it if needed, and does not require a reasonable ground floor.
Installing bamboo floors as floating floors involves the use of a high density thin layer. The boards are not seal. Or mounted downstairs but they remain along the tongue and groove on all sides. Floating floors This type of installation is usually used for cheap laminates in Perth that have low quality images. Bamboo flooring is the most common method for DIY customers because this method is cheaper and easier to install bamboo flooring than direct wood.
12 Bamboo Floor Mat Of Installing Photos